CM1312 FAX DRIVER

Use the arrow buttons to select Fax Job status , and then press OK. After scanning the page, Scan another page? Call the recipient to verify that the fax machine is on and ready to receive faxes. Reprint the original document with a white background, and then resend the fax. In this answer mode, the product answers incoming calls after a specified number of rings or upon recognition of special fax tones. Please try again shortly. Turn this setting off only if you use pulse dialing or if you have a service from your telephone company that also uses the sequence.

Uploader:	Shakakree
Date Added:	3 April 2005
File Size:	30.43 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	8173
Price:	Free* [*Free Regsitration Required]

For instructions, see Manual dial faxing. A communication error might be interrupting the fax job. The autoreduction setting might not be set correctly. If a jam exists, remove the jam. Use the arrow buttons to select Print faxesand then press OK. Use the arrow keys to select Send and press OK.

Contact the sender dm1312 have the sender resend the fax after altering the contrast settings. Faxes stop during sending.

Please try again shortly. Send a fax by using a group-dial entry Load the document into the automatic document feeder ADF input tray or on the flatbed scanner.

HP Color LaserJet CM1312 MFP Series Product - Change fax settings

Load the document into the automatic document feeder ADF input tray or onto the flatbed scanner. If the call is a fax call, the product receives the fax c1312 the call. If you subscribe to a ring-pattern service with a telephone company, you must set the product to answer the correct ring pattern. Also, do not load photographs, originals smaller than 5x5, or fragile originals into the ADF.

HP Color LaserJet CM1312 MFP Series Product - Use fax

The default setting is Off. If all redial attempts fail, the product updates the fax activity log by adding the error, and then it proceeds to the next number in the group. If the fax is being sent via a digital phone line, contact the service provider.

Not all fax products are compatible with DSL services. Check the rings-to-answer setting to verify that it is set properly. The product answers any calls that come through the telephone line.

Do one of the following: Use the arrow buttons to select Error correctionand then press OK. The factory-set default for stamp-received faxes is Off. Pick up the handset of a telephone that is connected to the same line as the product.

Europe, Middle East, Africa.

If you are close to the product, press Start Fax on the control panel and then hang up. The product sends the fax only at the fastest modem speed that the receiving fax machine can accept. Modify your browser's settings to allow Javascript to execute. Use the arrow buttons to select Advanced setupand then press OK.

HP Color LaserJet CM MFP Series Product - Change fax settings | HP® Customer Support

Use the arrow buttons to select System setupand then press OK. Faax not attach more than three devices to the line. In order to continue to use a PC fax program previously installed on the computer, it must be used with the c1m312 that is already connected to the computer; it will not function through the product modem.

The fax sounds that are associated with incoming and outgoing faxes. Turning off the setting might be useful when you are trying to send a fax internationally or receive one, or if you are using a satellite telephone connection.

Receive faxes when fax tones are audible on the phone line If you have a telephone line that receives both fax and telephone calls, and you hear fax tones when you answer the telephone, you can start the receiving process in one of two ways:. Use the following steps to cancel a fax job by using the Fax Job status menu:.